Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Bensalem
If your chimney is leaking, the mortar is crumbling, or a sweep turned up something worse, we handle full-system chimney repair in Bensalem. We know the township’s older housing stock well: ranches and split-levels on Street Road and Knights Road, brick-front colonials off Knights Road, and plenty of original masonry chimneys that have taken decades of freeze-thaw. That history changes what the repair usually is. Most of the time it starts with water and ends with a proper look at the flue, not a quick patch. Call (855) 658-4023. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Bensalem Homeowners Call Chimney Sweep Northeast Philadelphia for Chimney Repair
We’re a chimney and fireplace specialist, not a general handyman or a sweep-only outfit that refers the real work out. From the firebox to the crown, the whole system is covered by one team. That matters when a Bensalem chimney needs repointing, a new crown, flashing work, and a liner conversation all at once.
We work with professional-grade trade brands – HeatShield for resurfacing deteriorated clay tile, DuraFlex for flexible stainless retrofits, and Olympia Chimney and Gelco for liner and component work – because the right product for your flue beats the cheapest one on the shelf. Our technicians have up to 13 years of experience. Getting to Bensalem from our service area is straightforward, and we keep scheduling honest about what can wait and what shouldn’t.
You’ll find us all over the township and the surrounding neighborhoods: Feasterville, Trevose, Somerton, and Lower Southampton among them. We also serve Bensalem itself across its neighborhoods and along its main corridors. The reason homeowners keep calling us isn’t a claim about our own reputation – it’s that we’re willing to put a camera in the stack and show you what it finds before recommending a dollar of work.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Bensalem
Mortar Repointing
Crumbling mortar joints are the most common repair in Bensalem’s older exterior chimneys. When the joints between the bricks erode, water gets behind them and the stack starts to work loose. Repointing replaces the failed mortar with fresh material matched to the chimney, stopping the cycle before individual bricks start to spall and crack.

Spalling Brick Repair
Spalling is when brick faces peel and flake off, and it’s relentless along older ranches and colonials that have absorbed decades of Delaware Valley freeze-thaw. Once a brick spalls, its protective face is gone and water gets in deeper. We replace the failed units and address the moisture that caused it, whether that’s a bad crown above or failed flashing at the roof line.

Chimney Waterproofing
Most of the damage we see in Bensalem chimneys started with water. Damp winters and hot summers are hard on brick and mortar, and a spalling or cracked crown just lets it keep coming. Waterproofing the masonry after repairs are made helps the chimney shed rain instead of soaking it up, and it’s the step that keeps repointing from becoming an annual chore.

Flashing Repair
Flashing is the metal where the roof meets the chimney, and on exterior chimneys it’s a frequent leak point. Failed flashing sends water down into the stack and the framing behind it – quietly, out of sight, for a long time. We repair the flashing and check the crown at the same time, since both are part of keeping the top of the chimney closed.
Trusted Brands We Service in Bensalem
We use DuraFlex flexible stainless for retrofit liner jobs and HeatShield for resurfacing a deteriorating clay tile flue that doesn’t need full replacement. Olympia Chimney and Gelco round out the component and liner work when the job calls for it. We don’t stock parts on a truck or claim a local warehouse – the estimate tells you what we’re using and why, and we source what your specific flue needs. The right liner for the flue is the whole point, and the brand follows from that decision, never the other way around.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Bensalem Homes
- Undersized 8×8 clay flues on 1950s-70s ranches. Many original flues in this era of Bensalem home are too small to draft the appliances now vented into them, and that’s usually the real issue behind what looks like a routine cleaning request.
- Spalling crowns and failed flashing on exterior chimneys. Decades of freeze-thaw crack the crown, and water runs down into the mortar and firebox brick from the inside – damage that shows up long before the owner notices a leak.
- Third-degree creosote glazing in the smoke chamber. Shoulder-season burning builds up a hard, glazed layer a brush can’t touch, and it needs to be dealt with rather than brushed over.
- Missing or broken dampers and firebox deterioration. Original fireplace assemblies wear out, and a damper that no longer seats lets heat and moisture move through the chimney even when the fireplace is idle.
Pricing for Chimney Repair in Bensalem, PA
Here’s what the work typically runs in this market. Repointing a chimney runs roughly $600-$1,500 depending on how much of the stack needs redoing. Spalling brick repair, done alongside repointing, typically runs $400-$900. Chimney waterproofing on a single stack runs about $300-$700. Flashing repair usually lands around $250-$600, and a full chimney rebuild for a seriously deteriorated stack can run several thousand dollars because it involves taking the chimney apart and rebuilding it. The job’s decided by the written estimate, not a phone guess. The estimate is free, and nothing gets recommended until you’ve seen the camera evidence yourself. What sets the price is simple: how high the work goes, how much brick is actually failing, and whether the flue underneath needs resurfacing or relining on top of the exterior work.
We Also Serve Cities Near Bensalem
The same repair work reaches the surrounding area. If you’re in Feasterville, Lower Southampton, Trevose, or Somerton, you’re within our normal service range, and we schedule those calls the same way we do Bensalem. Wherever you are nearby, give us a call and we’ll book the evaluation.
Serving Bensalem, PA – Our Local Coverage Area
We serve Bensalem and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Bensalem
It’s often a repair problem, not just age. An 8×8 clay flue was standard for mid-century construction, but modern appliances vented into it can be a sizing mismatch that affects draft and safety. A camera inspection tells you whether your specific flue is undersized for what’s actually attached to it. Call (855) 658-4023 – estimates are free.
Usually it’s repointing, not rebuilding. Crumbling mortar joints get ground out and replaced with fresh mortar, which is far less work than a rebuild. A rebuild comes in when the brick itself has failed, not just the joints. The camera inspection and an on-site look separate the two. Call (855) 658-4023 for an exact quote.
You know by asking to see the evidence. Nothing is recommended without camera footage of the flue and firebox that you can watch yourself, and we say plainly when a repair can safely wait. If a quote can’t point to what the camera showed, question it. Call (855) 658-4023 and we’ll walk you through what we find.
Yes, especially if you burn intermittently. Shoulder-season burning in the Delaware Valley builds creosote in a way steady winter burning doesn’t, and it can glaze into a hard layer a brush can’t remove. A light-burning habit still builds a deposit worth checking. Call (855) 658-4023 to book a sweep and inspection.
First-degree creosote is a light, flaky soot that a brush removes easily. Third-degree creosote is glazed, hard, and pitted into the flue surface, and a standard sweep can’t touch it. It matters because third-degree glazing can push the job from cleaning into resurfacing or relining – and that’s exactly where camera evidence has to back up the recommendation. Call (855) 658-4023 for an honest read.
Written by the team at Chimney Sweep Northeast Philadelphia.