Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Cap & Crown for Northeast Philadelphia Homeowners
If your chimney cap is rusted through, bent, or missing, rain and snowmelt go straight down the flue, and if the crown on top of the masonry is cracked, water sits in those cracks and freezes. That’s the slow path to a spalled crown, damaged flue tile, and water staining on the ceiling below. Our technicians have up to 13 years of experience with the full chimney stack, from the firebox to the crown, and cap and crown work is one of the five service categories we handle in-house. We work with trade-grade products like Copperfield and Gelco rather than generic hardware-store covers. Call (855) 658-4023 for a free estimate, and when the job calls for it we can often get a technician out the same day.
What Our Chimney Cap & Crown Service Includes
Every part of the top of your chimney has a job. The cap keeps water, animals, and sparks out of the flue. The crown sheds water off the masonry itself. When either one fails, the damage moves downward into the flue and the framing, which is why we treat both as one repair rather than two separate errands.
Cap Installation
A chimney cap is the metal cover that sits over the flue opening on a set of legs or a mesh body, and it’s the first line of defense against rain, birds, squirrels, and stray embers. If your chimney has no cap at all, which is common on older Northeast Philadelphia rowhouses, this is the single most cost-effective thing you can add to the system. We size a Copperfield or equivalent cap to your actual flue dimensions, mount it to the crown or flue tile with proper fasteners, and confirm it doesn’t interfere with draft.

Cap Replacement
Caps don’t last forever. Standard galvanized caps rust through in a handful of years, and even good stainless models take a beating from freeze-thaw cycles and wind-driven rain. When the mesh is torn, the top plate is rusted, or the whole cap is loose and rattling in a storm, replacement is usually the right call rather than patching. We pull the old cap, check the flue tile and crown underneath while we’re up there, and install a new cap matched to the flue size.

Crown Repair
The crown is the concrete or mortar surface on top of the chimney that slopes away from the flue to shed water. Hairline cracks are normal with age, but once water gets into a crack and freezes, the crack widens and the crown starts breaking apart in chunks. We repair crowns by cutting out the failed sections and rebuilding the slope so water runs off the way it should. If the damage is more than surface-level, we’ll tell you plainly rather than covering it with a cosmetic patch.

Crown Coating
Crown coating is a flexible, waterproof membrane applied over a crown that’s still structurally sound but showing surface wear. It’s a good option when the crown has minor cracking but hasn’t started to crumble or separate from the flue. We use a coating designed to move with the masonry through temperature swings instead of cracking off in the first hard freeze. This is preventative work, and we’ll tell you honestly when it’s all your crown needs and when it isn’t enough.
Multi-Flue Cap
Many Northeast Philadelphia homes have a chimney with two or more flues side by side, one for the fireplace and one for a furnace or water heater. A single-flue cap won’t cover that, and stacking individual caps can leave gaps and look rough. A multi-flue cap spans the whole chimney top in one unit, covering every flue opening with proper clearance for each. We measure each flue, confirm the spacing, and set a cap that covers the full footprint without blocking draft on any flue.
Custom Cap
Oversized flues, unusual chimney shapes, and chimneys with a strong draft problem sometimes need a cap built to spec rather than a stock size. Custom work also covers caps with taller legs or specific mesh sizing to address downdraft or animal intrusion that a standard cap won’t solve. We take the actual measurements on site and have the cap fabricated to fit. It takes a little longer than a stock cap, but it fits right and doesn’t leave gaps.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Work With for Chimney Cap & Crown
We use Copperfield caps and crown products because they hold up in this climate, where a roof takes freezing rain, snow load, and summer heat in the same year. Copperfield’s stainless and copper caps are built for exactly that kind of abuse, and we know where their caps tend to fail first: usually the mounting legs and the mesh, not the top plate. When a crown needs rebuilding rather than coating, we work with Gelco crown repair materials, and we can apply a HeatShield resurfacing product when a deteriorating flue liner is part of the same job. Knowing which product solves which problem is the difference between a repair that lasts and one that comes back next spring.
We also work with DuraFlex flexible stainless liners when a cap or crown job uncovers a liner problem that has to be addressed at the same time. That happens more than people expect: a cap that’s been missing for years lets water into the flue, the clay tile spalls, and suddenly the top repair and a liner job are the same conversation. Whether your chimney has a Copperfield cap, a Gelco crown repair, or a cap of some other make, we can help, and we’ll tell you what it actually needs.
Signs You Need Chimney Cap & Crown Work Right Now
- A missing or loose cap. If you can see an open flue from the ground, or the cap rocks in the wind, water and wildlife have a clear path in. A loose cap can also blow off in a storm and damage the roof, so it’s worth fixing before the next one.
- Rust streaks or a crumbling top plate. Rust running down the cap and onto the masonry means the metal has thinned to the point of failing. Once the top plate rusts through, the cap stops shedding water and starts funneling it toward the flue instead.
- Visible cracks or missing chunks in the crown. A crown that’s cracked, chipped, or separating from the flue tile lets water into the masonry itself. That’s the leading cause of the freeze-thaw damage that eventually means a rebuild instead of a repair.
- Water stains on the ceiling or chimney breast. Brown rings or damp patches near the chimney usually trace back to a cap or crown failure, not the roof. It’s worth having the top of the chimney checked before assuming the flashing is at fault.
- Birds, squirrels, or debris in the firebox. Animals nesting in an uncapped flue leave droppings, nesting material, and sometimes young behind, all of which are a fire hazard and a draft problem. A properly fitted cap closes that opening for good.
Our Chimney Cap & Crown Process – Step by Step
- 1
We start with the whole system, not just the top. Before we quote a cap or crown, we look at the full chimney: the firebox, the damper, the flue, and the masonry above the roofline. A top-of-chimney repair that ignores a failing liner below is only half a job, and we’d rather find that out now than after the invoice.
- 2
We inspect the flue with a camera. A camera inspection shows us the inside of the flue, including cracks, spalling, and gaps that aren’t visible from the ground or even from the roof. We include a photo report so you can see exactly what we saw, which makes the recommendation yours to judge rather than ours to assert.
- 3
We give you a flat-price written estimate. The estimate breaks down each piece of work: the cap, the crown repair or coating, any liner work, and the labor. The price is agreed before we book the job, so there’s no surprise on the day.
- 4
We do the work and verify it. Cap installation, crown rebuilding, or coating happens in one visit for most jobs. We check the cap is secure and the crown drains properly before we leave, and we confirm the flue still draws correctly with the new cap in place.
- 5
We tell you what can wait. If some of what we find is cosmetic or can safely wait a season, we’ll say so. You shouldn’t be talked into a rebuild you don’t need, and the photo report lets you see the difference for yourself.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Northeast Philadelphia?
Chimney cap and crown work in Northeast Philadelphia typically runs a few hundred dollars for a straightforward cap, and more when the crown needs to be rebuilt or the job turns into liner work as well. The exact price depends on the flue size, the number of flues, how much crown damage there is, and whether the chimney needs any other repair at the same time.
| Service | Typical Estimated Range |
|---|---|
| Cap installation (single flue) | $185 – $425 |
| Cap replacement | $185 – $425 |
| Multi-flue cap | $325 – $650 |
| Custom cap (fabricated to spec) | $450 – $900 |
| Crown coating | $250 – $550 |
| Crown repair or rebuild | $400 – $1,200 |
What moves the price: the flue diameter and number of flues, the height and pitch of the roof (steeper roofs take longer to work on safely), whether the old cap or crown has to be cut away, and whether the inspection finds a liner problem that has to be handled at the same time. To avoid overpaying, insist on a written estimate that itemizes the cap, the crown, and any liner work separately, and ask to see the camera photos before agreeing to anything. Our free estimate includes the flue inspection, the photo report, and an itemized flat price. Call (855) 658-4023 for an exact quote; the written estimate sets the final price.
Chimney Cap & Crown Near Northeast Philadelphia – Our Service Area
We work across Northeast Philadelphia and the surrounding communities, including Rockledge, Lower Moreland, McKinley, Bensalem, Abington, Feasterville, Trevose, Lower Southampton, Olney, Bustleton, and Rhawnhurst. If you’re near our core area, we can usually reach you quickly, and for most cap and crown jobs a single visit covers the inspection and the work. If you’re also due for a cleaning, our chimney sweep Northeast Philadelphia page covers what a sweep involves, and nearby homeowners can find chimney cap & crown details for Rockledge and chimney cap & crown information for Lower Moreland.
Serving Northeast Philadelphia, PA – Our Local Coverage Area
We serve Northeast Philadelphia and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Cap & Crown in Northeast Philadelphia
A chimney cap is the metal cover over the flue opening, and the crown is the sloped concrete surface on top of the masonry around it. The cap keeps rain, animals, and embers out of the flue, and the crown sheds water off the chimney structure. Together they protect the whole chimney from water damage, which is the most common cause of expensive repairs. If either one is failing, it’s worth a look before the damage moves down the flue.
Most cap installations and crown coatings are done in a single visit of a few hours. A full crown rebuild or a custom cap takes longer, usually because the crown has to cure or the cap has to be fabricated to fit. We’ll give you a realistic timeline with the written estimate so you know what to expect. Call (855) 658-4023 for an exact quote; estimates are free.
Typical estimates run from about $185 to $425 for a single-flue cap, $325 to $650 for a multi-flue cap, $250 to $550 for crown coating, and $400 to $1,200 for a crown repair or rebuild. The written estimate sets the final price, and it’s itemized so you can see what each part of the job costs. Call (855) 658-4023 for an exact quote; estimates are free.
Yes. We work with Copperfield caps and crown products, Gelco crown repair materials, and HeatShield for liner resurfacing when a failing flue liner turns up during the inspection. We also fit DuraFlex flexible stainless liners when a full liner replacement is the right fix. Whether your chimney has one of these brands or another make entirely, we can help.
Same-day service is often possible for cap and crown work. We answer 24/7 on the phone, and we dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (855) 658-4023 to find out what’s available.
We’ll walk you through the warranty terms for the products and the workmanship before you book, so you know exactly what’s covered and for how long. Coverage varies by product and by job type, and we don’t want you guessing. Ask us during the estimate and we’ll spell it out in writing.
Clear access to the chimney is all you need: move any furniture or decor away from the fireplace and make sure we can reach the roof. We bring our own ladders and equipment, and we don’t need you to do anything at the chimney itself. If you have pets, keeping them away from the work area makes the visit go more smoothly. Call (855) 658-4023 with any questions before we arrive.
Schedule Your Chimney Cap & Crown Service in Northeast Philadelphia Today
If your cap is rusted, missing, or the crown is cracked and letting water in, don’t wait for the next freeze to make it worse. Call (855) 658-4023 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll inspect the flue, show you the camera report, and give you a flat price before any work is booked.
Written by the team at Chimney Sweep Northeast Philadelphia.