Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Cap & Crown in Rhawnhurst, PA
A failing chimney cap or crown in Rhawnhurst usually shows up as a water stain on a ceiling near the chimney breast, and it’s almost always cheaper to fix before the first hard freeze than after. Most Rhawnhurst chimneys are original to 1950s and 1960s rowhouses and twins, and the mortar crowns on those stacks have been through six decades of freeze-thaw cycling. Call (855) 658-4023 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Fast, Reliable Chimney Cap & Crown Across Rhawnhurst
We work Rhawnhurst often enough to know the housing stock by sight. This is a post-war, single-family rowhouse-and-twin neighborhood, and the chimneys here tell you that the moment you get on a roof. If you live on Castor, Faunce, or Strahle, the brick stack on your house is probably the one that went up with the building in the 1950s or 60s – exterior brick, terra cotta flue liners, and a mortar crown that has had a very long run. That age matters for cap and crown work, because the component that fails first is rarely the one homeowners expect. Our technicians have up to 13 years of experience, and they’ve learned to look at the whole stack, not just the flue with the fireplace under it. Call (855) 658-4023 and we’ll get a trained eye on your roof.
Why Rhawnhurst Homeowners Call Chimney Sweep Northeast Philadelphia for Chimney Cap & Crown
A cap and crown job is small, which is exactly why it gets done badly. A crew that only sweeps flues will tell you the crown looks fine and move on. We handle the full chimney system from the firebox to the crown, so when we’re on your roof in Rhawnhurst we’re already looking at the mortar bed, the flashing, the flue tile tops, and the cap together. That’s the difference between patching a leak and stopping it.
The other reason Rhawnhurst homeowners call us back is the material. We work with professional-tier chimney brands – HeatShield, Gelco, Olympia Chimney, Famco – because crown coatings and caps that come from the trade side of the industry hold up to Northeast Philadelphia winters in a way that big-box hardware store products don’t. Our technicians have up to 13 years of experience on this exact class of mid-century rowhouse and twin chimney. And because we do fireplace repair too, you’re not hiring a second contractor when the work moves inside the house.
Response into Rhawnhurst is straightforward. It’s a dense, block-by-block neighborhood, so we book the job, arrive with the right materials for the crown or cap we’ve scoped, and finish it in a single visit whenever the weather allows.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Rhawnhurst
These are the four jobs we run most often on Rhawnhurst roofs. Three of them are the ones this neighborhood specifically needs: crown repair, multi-flue caps, and crown coating. If you’re not sure which one applies to your stack, our chimney cap & crown team can tell you after a look at the roof.
Cap Installation in Rhawnhurst
A chimney cap is the single cheapest piece of protection you can put on a Rhawnhurst chimney, and a lot of these houses have never had one. An open flue takes rain straight down the liner, and in a stack shared or abutting a neighbor’s, that water doesn’t stay in your half. We size the cap to the actual flue opening, not a generic fit, and set it so it sheds water away from the crown rather than onto it.

Cap Replacement in Rhawnhurst
Most of the caps we replace in Rhawnhurst were installed decades ago and have rusted through at the seams or worked loose in a storm. A loose cap rattles, admits downdrafts, and lets rain run down the inside of the flue, which accelerates rust on the damper assembly and speeds creosote buildup. We pull the old cap, check the flue tile tops while we’re up there, and set a new one that’s anchored properly to the stack.

Crown Repair in Rhawnhurst
The mortar crown is the sloping cap of concrete or mortar at the very top of the chimney, and on a 1950s Rhawnhurst twin it’s usually the first thing to go. Freeze-thaw cycles spall and crack it, water gets behind it, and from there it tracks down into the flue liner and smoke chamber. Crown repair means rebuilding that slope so water runs off the sides instead of into the stack. On a shared or abutting chimney, this is where the neighborhood’s housing layout really matters – more on that below.

Crown Coating in Rhawnhurst
Not every crown needs to come off. If the mortar is sound underneath and the cracking is surface-level, a flexible crown coating can seal it and buy years before a rebuild makes sense. We use trade-grade coatings, and we’ll tell you plainly when a coating will hold and when it’s money spent on a crown that’s already past saving. That judgment call is the whole job.
Multi-Flue Caps and Custom Caps
A Rhawnhurst twin often has two flues in one stack, and some have more. A multi-flue cap covers the whole stack in one unit, which is cleaner than two separate caps fighting for the same footprint, and it keeps rain and downdrafts out of both flues at once. Where the stack is an odd size or the flues are set at an angle, we have a custom cap made to fit rather than forcing a stock size onto it.
Trusted Brands We Service in Rhawnhurst
We specify products from HeatShield, Gelco, Olympia Chimney, and Famco, and the reason is simple: these are the brands made for the trade, and they solve specific problems rather than generic ones. HeatShield is a liner resurfacing system for deteriorating clay tile, which matters on a Rhawnhurst stack where the original terra cotta has cracked but the chimney isn’t ready for a full liner. Gelco and Olympia Chimney supply caps and crown materials built for cold-climate cycling. Famco covers the fabrication side for custom caps. We don’t stock parts – we scope the job, order what fits your stack, and turn it around quickly so the roof isn’t open any longer than it has to be.
Common Chimney Cap & Crown Problems We See in Rhawnhurst Homes
Here’s the honest, specific version of what goes wrong on these roofs. A general chimney page will tell you caps keep out rain and crowns crack. That’s true everywhere. It’s not what makes Rhawnhurst different.
- A spalled crown on one half of a shared twin chimney. This is the classic Rhawnhurst call. Two addresses, one exterior brick stack, and the crown fails on one side. Water gets behind the mortar, tracks through the shared brick structure, and shows up as a ceiling stain in the other unit. The homeowner who calls is often the one whose fireplace hasn’t been used in years.
- Cracked terra cotta flue liners from decades of freeze-thaw. The original liners in these 1950s and 60s houses are past their service life. Once a tile cracks, moisture and flue gases migrate through the shared brickwork, and that’s a slow problem that becomes a structural one.
- Missing or loose caps on abutting stacks. A lot of Rhawnhurst chimneys were never capped, or the cap came off in a storm and nobody noticed. Open flues let downdrafts and rain into both flues, rust the damper assemblies, and speed creosote buildup.
- Failed flashing where the chimney meets the roofline. On a tight rowhouse roof, the flashing is doing more work than it looks like. When it pulls away, the leak reads as a crown problem but starts at the roof joint instead.
Why Rhawnhurst’s Twins Change How We Do This Work
Rhawnhurst is a post-war, single-family rowhouse-and-twin stronghold, and the party-wall layout is the thing that makes cap and crown work here different from anywhere with detached houses. In a 1950s or 60s twin, the exterior brick chimney is often a single shared structure serving two addresses. That means a crumbling crown or failed flashing on one half can let water track into the neighbor’s flue and smoke chamber – a condition that basically doesn’t happen in a market full of freestanding chimneys.
A typical job starts with a water stain on a ceiling near the chimney breast in a mid-century twin, and traces back to a mortar crown that has spalled and cracked from decades of freeze-thaw cycling. Because the chimney is shared or abutting, a qualified local pro checks the crown and flashing on both halves of the twin, not just the one with the fireplace in use. From there the work is rebuilding or coating the crown and resealing the flashing to stop water reaching the flue liner and smoke chamber. If the terra cotta liner is also cracked – and on a 60-year-old Rhawnhurst flue it often is – the fix may extend to relining before a new multi-flue cap goes on top. Skipping that step means capping a flue that’s already letting moisture through the brick.
Northeast Philadelphia’s cold winters with repeated freeze-thaw cycles spall and crack the exterior brick and mortar crowns on these mid-century chimneys. Summer humidity and thunderstorm downdrafts push water into the aging flues. So crown and relining calls here spike in the fall and again after the winter thaw, when the damage from the cold season finally shows up as a stain on the ceiling.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Rhawnhurst, PA
These are typical ranges for cap and crown work in the Rhawnhurst market. They’re estimates – the written estimate you get after we’ve seen the roof is what sets the final price, and the estimate itself is free.
| Service | Typical Rhawnhurst Range |
|---|---|
| Cap installation (single flue) | $250 – $550 |
| Cap replacement | $225 – $500 |
| Multi-flue cap (twin stack) | $450 – $900 |
| Crown repair (rebuild) | $550 – $1,400 |
| Crown coating (surface sealer) | $300 – $700 |
| Custom cap (fabricated) | $600 – $1,200 |
What moves the number: how much of the crown is failing, whether the stack is shared or abutting and needs inspection on both halves, roof access on a tight street, and whether the flue tiles are sound enough to keep. If the liner is cracked and relining is needed, that’s a separate line item and we’ll show you why it’s on the estimate before you agree to anything. We don’t recommend work without a photo you can see for yourself, and we’ll tell you plainly when something can safely wait until next season.
We Also Serve Cities Near Rhawnhurst
We work across Northeast Philadelphia and the surrounding neighborhoods, including Mayfair, Holmesburg, Bustleton, and the rest of the Northeast. The housing stock shifts block to block – more detached houses in some areas, denser rowhouse blocks in others – and the cap and crown work shifts with it. If you’re just outside Rhawnhurst, call and we’ll confirm we cover your street.
Serving Rhawnhurst, PA – Our Local Coverage Area
We serve Rhawnhurst and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Rhawnhurst
No, but we do need access to both sides of the stack to check them properly. In a Rhawnhurst twin the exterior brick chimney is often one shared structure, so a crown that’s failing on your half can be letting water into your neighbor’s flue. We inspect both halves whether or not anyone is inside, because the roof access is what matters. It’s worth giving the neighbor a heads-up so nobody is surprised by a technician on the roof. Call (855) 658-4023 for an exact quote – estimates are free.
You can’t tell from the ceiling alone, and that’s the honest answer. A stain near the chimney breast in a Rhawnhurst twin can come from a spalled crown on either half of a shared stack, from failed flashing at the roofline, or from a cracked flue liner letting moisture through the brick. The only way to know is to look at the crown and flashing on both halves of the twin. We don’t recommend a repair without photo evidence you can see. Call (855) 658-4023 for an exact quote – estimates are free.
A multi-flue cap sized to the full stack is usually the right answer for a twin with two flues. It covers both openings in one unit, sheds water away from the crown instead of onto it, and stops downdrafts from pushing into both flues at once. Where the stack is an unusual dimension, a custom-fabricated cap fits better than forcing a stock size. We scope the stack before recommending either. Call (855) 658-4023 for an exact quote – estimates are free.
It depends on how deep the failure goes, and nobody can tell you from the ground. If the mortar underneath is sound and the cracking is surface-level, a flexible crown coating seals it and buys years. If the crown has spalled down to loose material, a coating will peel off within a season and a rebuild is the honest call. On a 1950s Rhawnhurst stack, the crown is often far enough gone that rebuilding the slope is the only fix that holds. We’ll show you which one you’re looking at before any work starts. Call (855) 658-4023 for an exact quote – estimates are free.
NFPA 211 calls for an annual inspection of the chimney and venting system, and that applies whether or not the fireplace is in use. The reason is exactly what we see in Rhawnhurst: a chimney that isn’t burned in still takes rain, freeze-thaw damage, and cracked liners, and those problems don’t announce themselves until water is on the ceiling. An annual look catches a failing crown before it becomes a relining job. Call (855) 658-4023 for an exact quote – estimates are free.
Get Your Rhawnhurst Chimney Cap & Crown Checked
If you’ve got a water stain near the chimney breast, a crown that looks crumbly from the ground, or a stack with no cap on it at all, the fix is usually smaller than the worry. We’ll get on the roof, photograph what’s actually failing, and give you a written estimate in plain language – including when the work can safely wait. Our technicians have up to 13 years of experience with the mid-century rowhouse and twin chimneys that make up most of Rhawnhurst. Call (855) 658-4023 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Northeast Philadelphia.