Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Rhawnhurst, PA
We provide independent Gelco service across Rhawnhurst, and the one thing that sets our work apart here is this: we treat a Gelco cap or damper as part of the whole flue, not as a standalone part. Rhawnhurst homes are mostly 1950s-60s twins and rowhouses in 19152, and their chimneys are old enough that hardware failures and flue problems usually arrive together. Call (855) 658-4023. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
We work from the firebox to the crown, using professional-tier chimney brands like DuraFlex, HeatShield, Olympia Chimney, Famco, and Copperfield because each one solves a specific failure a generalist can’t reach. Gelco caps, dampers, and fireplace components are part of that system, and we service them across Rhawnhurst the same way. Chimney Sweep Northeast Philadelphia is an independent service provider, not affiliated with or authorized by Gelco.
Why Rhawnhurst Residents Choose Us for Gelco Service
Our technicians have up to 13 years of experience, and a good share of that time has gone into mid-century masonry chimneys exactly like the ones lining Castor, Faunce, and Strahle. Those chimneys were built with terra cotta flue liners that are now 60+ years old, and the Gelco hardware sitting on top of them has seen just as many freeze-thaw cycles. We know how that combination ages, and we know which fixes hold and which ones are just papering over a crack.
Being independent matters here. We aren’t tied to Gelco, so when a cap is past saving we say so and fit the part that suits the flue. When a damper just needs a rebuild, we rebuild it. No upselling, no manufacturer script.
Quality parts that fit is the standard we hold to. Every Gelco cap, damper assembly, and door set we touch gets matched against the actual opening, not eyeballed. That’s how you avoid the loose cap that starts this whole cycle over again. Scheduling in Rhawnhurst is straightforward, and our crew works the block-by-block rowhouse layout here every season. Call (855) 658-4023 for a free estimate.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Rhawnhurst
Gelco equipment fails in ways that track directly to the housing and weather in Rhawnhurst. These are the patterns we see most.
- Rusted, seized top-mount caps. Gelco top-mount multi-flue caps sit on exposed exterior brick chimneys through decades of freeze-thaw. The mounting legs and screws seize and rust through, and once the cap lifts, water gets straight past the crown. On a Rhawnhurst twin, that moisture can track into the neighboring flue.
- Single-flue caps that no longer seat. As the terra cotta flue tile lips spall and crack, a Gelco single-flue stainless cap stops sitting squarely and leaves a gap for rain and downdraft. In a cold Northeast Philadelphia winter, that gap is the first place ice forms.
- Dampers that corrode shut in summer and stick open in winter. Humid summer air works on Gelco fireplace damper assemblies, and by heating season they’ve either seized shut or jammed wide. A damper stuck open means heat loss and smoke spill into a rowhouse living room.
- Glass doors and screens that pit and bind. Gelco fireplace glass doors and spark screens take heavy use on wood-burning fireplaces that saw decades of burning before the flue was ever relined. Hardware pits, hinges bind, and the door set stops sealing.
- Cracked crowns behind the cap. Decades of spalling have cracked the mortar crowns on these mid-century chimneys, so water finds the flue whether or not the Gelco hardware above it is sound. Crowning is where this problem actually gets solved.
Gelco Service in Rhawnhurst: What Local Conditions Mean for Your Equipment
Here’s the local insight that shapes how we approach Gelco work in Rhawnhurst: in the 1950s-60s twins along Castor and Faunce, the exterior brick chimney is often shared or abutting between the two halves of the building. That means a Gelco cap or crown failure on one side doesn’t stay on one side. Water tracks along the shared masonry and into the neighboring flue, and the household without a working fireplace can end up with a ceiling stain they can’t explain.
So when we come out for Gelco service on a Rhawnhurst twin, we check and re-cap both halves of the chimney, not just the side with the firebox. We look at the crown and flashing on both. That single habit catches a lot of problems before they reach the drywall below. It’s also why we’d rather do the crown and waterproofing work while the cap is off, instead of bolting new Gelco hardware onto failing mortar and calling it done.
Gelco Models & Products We Service in Rhawnhurst
We service the Gelco product types that live on Rhawnhurst chimneys: top-mount multi-flue chimney caps, single-flue stainless chimney caps, fireplace dampers and damper assemblies, and fireplace glass doors and spark screens. Each one gets matched against the flue opening and the masonry it sits on, and each gets quality parts that fit the actual dimensions rather than whatever is closest on a shelf.
Where a 60-year-old flue is cracked and spalling, honest advice is to reline or rebuild rather than keep mounting new Gelco hardware onto terra cotta that’s already failing. For caps and dampers, the sizing is standard and the cost is low, so a matching quality part usually makes sense. That judgment call is why an independent approach to Gelco service works better here than a brand-aligned one.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Rhawnhurst
Gelco service costs depend on what’s actually wrong at the chimney. A single-flue cap replacement is a modest job. A rusted top-mount cap sitting on a crumbled crown that needs recrowning and waterproofing is not. The written estimate sets the final price, and the estimate itself is free.
- Gelco single-flue cap replacement: quoted per job
- Gelco top-mount multi-flue cap replacement: quoted per job
- Gelco damper assembly repair or replacement: quoted per job
- Glass door and spark screen hardware repair: quoted per job
- Crown repair and chimney waterproofing: quoted per job
What drives the number: how much masonry is failing behind the Gelco part, whether the flue liner is sound, and whether the chimney sits on a shared twin wall. We don’t quote over the phone before looking. Call (855) 658-4023 for a free estimate.
Serving Rhawnhurst, PA – Our Local Coverage Area
We serve Rhawnhurst and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Rhawnhurst
Sometimes, but not often. If the fasteners have seized and rusted through, drilling and re-setting them in the same spalled masonry usually buys a season at most. We check both halves of the twin and re-cap the side that needs it, then look at the crown that let the water in. Call (855) 658-4023 for an exact quote – estimates are free.
Replacement is the last step, not the first. A damper stuck open after humid summer air is often a corroded or seized assembly that can be rebuilt or freed. If the frame itself is rusted thin, a new damper assembly is the honest answer. We’ll tell you which one you’re facing.
Because the cap isn’t usually the whole problem. Summer humidity and thunderstorm downdrafts push water into aging flues, and on these mid-century chimneys the water is often coming through a cracked mortar crown or failing flashing behind the cap. We look at the crown, the flashing, and the masonry on both sides of a shared chimney before recommending any repair.
No. A cap keeps rain and downdraft out at the top, but it can’t fix a flue liner that’s cracked after six decades of freeze-thaw. On many Rhawnhurst flues that age, the real answer is resurfacing with HeatShield or a DuraFlex flexible stainless liner. Call (855) 658-4023 to have the flue looked at – estimates are free.
Yes. We handle the sweep and the Gelco door and screen hardware in the same visit, along with damper and cap checks. Chimney Sweep Northeast Philadelphia provides independent Rhawnhurst service and is not affiliated with or authorized by Gelco, so the recommendation you get is about your flue, not a brand.
Service Areas Near Rhawnhurst
We also serve homeowners in Northeast Philadelphia, Rockledge, Lower Moreland, McKinley, Abington, plus the nearby areas of Mayfair and Holmesburg. If your chimney sits on a twin or rowhouse anywhere in this stretch, the same block-by-block approach applies. Call (855) 658-4023 to book.
Book Your Gelco Service in Rhawnhurst Today
If your Gelco cap is rusted, your damper sticks, or you simply want the flue checked before heating season, call (855) 658-4023. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free, and the written quote sets the price before any work starts.
Written by the team at Chimney Sweep Northeast Philadelphia.